Communion Of Dreams


Turning words into books.

As I noted a couple of months ago, I found a printer to produce the pages for a hand-bound copy of St Cybi’s Well. This is a photo-essay of the process of turning those pages into finished books. This is not intended to be actual instruction on how to bind books.

My printer for Communion of Dreams had been bought-out and was no longer capable of doing the printing for St Cybi’s Well. I was able to source a new printer after some trouble. Everything was slowed down due to Covid, of course. Eventually I was able to drive over to Wichita KS to pick up the printed pages.

Printed pages and color cover stock. Note that these are oversize. This is necessary to make sure the ‘grain’ of the paper runs the correct way, so that the pages will turn properly once the book is bound. They get trimmed down after binding.

Each section (group of pages) has to be folded, then punched consistently to allow for sewing.

It’s easier to do the laser-design work on the section before binding. The design is that of the St Melangell Centre, of a hare, at Pennant Melangell. This is the location in the book where much of the action takes place.
Once the individual sections are all punched, they are gathered into books and then sewn. This style of binding is “sewn on tapes”.

Sewn text blocks. Note that these are oversize, using the full printed sheets.
The sewn text blocks, now cut down to finished size. This is done individually, using a c. 1915 guillotine.
I designed a simple thin-board jig using my laser, which allowed me to mark on the cut bookcloth where to mount the archival bookboard.
The marked sheets of bookcloth.
Mounted bookboard on the bookcloth.
Completed case, with the edges of bookcloth turned in and additional liners added. Those liners are needed to balance the strain on the boards cause by mounting the color cover stock label.
Exterior of the case, with color cover stock mounted.
Text blocks now lined with support paper along the spine, and endbands added at the head and tail. The outer page of the first and last section has been cut down to function as an additional hinge. This, combined with the sewing tapes, is sufficiently strong to mount the text block to the case covers.

Text blocks mounted into case covers, and allowed to dry under weight.
Finished books. If you look closely you’ll note a slight wedge shape to the text blocks. I wanted a flat spine to match the hand-bound copies of Communion of Dreams, but St Cybi’s Well is longer, and so required more sections. This made the swelling at the spine more noticeable. Once the books are opened and read once or twice, the wedge shape should disappear.
Finished copies.

If you would like your own hand-bound copy of St Cybi’s Well or Communion of Dreams, click the links. Each edition is limited to just 53 numbered copies, plus two Artist’s/Author’s proof copies. At either link you can also order one of the remaining copies of the Amazing Koob, as well as signed paperback copies. And of course, you can always download the books from Amazon (remember, they’re free on the first of each month).

That completes the next-to-last phases of my Kickstarter. The final phase will be the design and completion of the leather bindings.

Jim Downey